Fadis 4.0: A winder at the customer’s
Fadis is synonymous with precision winding machines;
the oldest company owned by the same family since its
establishment in 1960. It is a leading company in the production
of soft winders, rewinders, assembly winders, hank to cone
winders, reeling machines, spooling and cops winders,
intermingling and air texturizing machines for the processing of
any kind of yarn, from cotton, wool and silk to artificial and
synthetic fibres, mixed fibres, intermingled yarns and fancy
Fadis will be present at ITMA Barcelona in H7 – B209, with a
stand of more than 400 sq.m. where all the lines and innovations
will be displayed.
Sincro Plus Fc.
PACKAGE LINE - ONE SOLUTION FOR ALL
The soft winders, rewinders and assembly winders with
electronic yarn-guided winding spindles with precision crossing
and completely electronical “on-line” tension and density
control are designed for the processing of both continuous and
staple yarns. They are without any doubt highly technologically
advanced and efficient machines on the market today.
A new line of compact and efficient double-sided rewinders,
with a complete range of machines with automatic doffing will be
presented as a preview at the ITMA exhibition.
HANK LINE – EXPERIENCE IN A MODERN
Hank dyeing is especially fascinating just because it
combines secular experience handed on from generation to
generation with the most sophisticated technologies. It is a
competition of excellence, where research, innovation,
technology and competitiveness play an essential role.
Fadis adopted it as its own by realising the only reeling
machine and the only hank to cone winder with electronic
yarn-guided winding spindles equipped with precision crossing on
the market today, ideal for processing cotton, wool, acrylic,
silk and viscose.
ELASTIC YARN LINE – A CONTINUOUS
Undisputed leader in this steadily growing sector, Fadis was
the first company to have presented the SINCRO M machine for the
production of Fapp™ (Fadis Precision Package), with a very low
density that allows a wide margin of retraction for the yarn
during the dyeing process, thus maintaining a high residual
elasticity percentage of the stretch yarn.
In fact, with this extensively tested preparation system and
thanks to the possibility of unwinding the FAPP™ packages with
the SINCRO RFM SW rewinder with its “online” automatic tension
control, it is possible to obtain results quite similar to the
quality of hank dyeing, but with the simplicity and
inexpensiveness typical of package dyeing.
ELASTIC AND ELASTOMERIC YARN LINE –
THE RIGHT MACHINE FOR EACH PROCESS
The highest level of “open platform” constructional design is
found in the SINCRO MULTIPLA machine.
This is a “multi-function” machine equipped with the high
technology that distinguishes the whole “SINCRO” line, able to
meet 8 different production needs: soft winder, rewinder,
assembly winder, air intermingling machine, air covering, air
covering from FAPPTM, MUFF and hanks, Air Covering Dual Core
machine and the new Texturisation machine that will be presented
at ITMA 2019 to complete the line.
Thanks to this innovative constructional principle, it is
possible to create, together with the customer, a machine which
fully responds to his technical/production requirements, and
which can be modified at any time to meet new market needs.
Sincro Multipla Air jet Dual core
In this line, Fadis is present with its Sincro Sprint machine
for the preparation of flanged bobbins, used in the covering
process and as assembly winder in the silk twisting process.
This is a modern concept of compact and efficient double-sided
rewinder with independent winding spindles with electronic
yarn-guide with precision crossing and motorised bobbin.
Equipped with an “online” automatic control device, it has been
designed to reach high winding speeds and offers the
versatility, choice and modification of all the parameters
necessary to wind the yarn onto flanged bobbins.
COPS WINDING LINE
This novelty will be presented at ITMA 2019. Brand-new and
revolutionary, the SINCRO COPSY machine is meant to prepare cops
and flanged bobbins (i.e. Hamel type).
The uniqueness of this new machine lies in the possibility to
at least double the productivity when compared to existing
machines, simplifying the performance and loading and unloading
of the bobbins by the operator, thanks to an innovative
technical solution which changes its ergonomics. All this is
made possible by using independent winding spindles equipped
with an electronic yarn-guide, with precision crossing and